Nuestras marcas > Aerial Acoustics
Subwoofer SW12
Cajas Acusticas
Descripción
Producto sin descripción técnica.
Producto en stock (en fecha de última actualización)
Ficha técnica
Response :Flat to below 20Hz
Woofer:12.5" (318 mm) diameter cast frame. Aluminum cone. Very large magnet. Dual suspension. 3" diameter 4-layer coil. Almost 2" of linear excursion
Power Amplifier:400 Watt, high current, fully symmetrical, all discrete design. Less than 0.05% THD. Large toroid and power supply. Large heat sink.
Low Pass:30 Hz to 120 Hz continuously variable. 24 dB. 30 Hz is for Models 20T, 9, and Model 8
High Pass:40, 50, 60, 70, 80, and 100 Hz stepped. 6 or 12 dB selectable slopes
Remote Functions:Power, volume, mute, reference setting, damping, EQ Filters Out,
Display Off
Power Modes:Turn-On/Music-on/delayed-off. 12 VDC immediate on/off.
IR Remote on/off
Connections:6 balanced & 6 RCA L/R inputs, outputs, and high pass outputs. Speaker level inputs via DIN jack and cable. 12 volt DC turn-on jack. DB-25 socket for automation or optional external display / IR sensor. 2 control signal relay jacks for multi-sub systems. Line cord socket
Sensitivity:100 mv balanced or single-ended for 400 W. 1 volt speaker-level input
Impedance:45k ohms balanced. 10k ohms single-ended. 1k ohm speaker-level input
Cabinet:MDF with 2" front. Extensive internal bracing. Front vent and display
Dimensions: 635 x 356 x 584 mm.
Rear heatsink adds 38mm depth
Weight:59kg, 73kg packed.
Weight Bases:11kg, 12kg packed
